Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Month: June 2025

Home / 2025 / June (Page 18)
June 9, 2025 BY
IN GE

Mark VI Series IS415UCVGH1AE VME Controller Card

Functional Description

The IS415UCVGH1AE is a VME controller card developed by GE. It is part of the Mark VI control system.

This motherboard is a high-performance, single-slot computing module designed for robust and efficient operation.

It is powered by Intel’s ultra-low voltage Celeron processors running at 650 MHz, ensuring reliable performance while maintaining low power consumption.

Equipped with 128 MB of Flash memory and 128 MB of Synchronous Dynamic Random Access Memory (SDRAM), the board provides ample storage space and fast data access for seamless task execution.

Features

For network connectivity, the UCVG features two 10BaseT/100BaseTX-compliant Ethernet ports, each utilizing an RJ-45 connector. These Ethernet ports support a variety of communication functions.

The primary Ethernet port on the UCVG is designed for integration with the Universal Data Center (UDH), facilitating configuration tasks and peer-to-peer communications.

This ensures that the UCVG can be easily managed and can communicate efficiently with other devices or systems in the network, making it a suitable choice for a variety of applications that require stable and fast data transmission.
June 9, 2025 BY
IN Emerson

Emerson PR6423 Eddy-Current Displacement Sensor

The PR 6423 is a non-contact eddy current sensor of rugged construction.

Designed for extremely critical turbomachinery applications such as steam, gas, compressor and hydraulic turbomachinery, blowers and fans.

The purpose of the displacement probe is to measure position or shaft motion without contacting the surface under test (rotor).

In sleeve bearing machines, there is a thin film of oil between the shaft and the bearing material.

The oil acts as a damper so that shaft vibrations and position are not transmitted through the bearing to the bearing housing.

The use of bearing box vibration sensors to monitor sleeve bearing machines is discouraged because vibration from shaft motion or position is greatly attenuated through the bearing oil film.

The ideal method of monitoring shaft position and motion is to measure shaft motion and position directly through the bearing or by installing a non-contact eddy current sensor inside the bearing.

The PR 6423 is commonly used to measure vibration in the following equipment

eccentricity, thrust (axial displacement), differential expansion, valve position and air gap.

Non-contact measurement of static and dynamic shaft displacements

– Axial and radial shaft displacement (position)

– Shaft eccentricity

– Shaft vibration (motion)
June 9, 2025 BY
IN ABB

AT868 Panametrics Liquid Flow Ultrasonic Transmitter

Applications

The AquaTrans AT868 Liquid Flow Transmitter is a complete ultrasonic flow metering system for measuring the following liquids:

– Drinking water

– Wastewater

– Sewage

– Discharge water

– Treated water

– Cooling and heating water

– Other liquids

Features

– Economical, non-intrusive flow measurement

– Simple setup and installation

– Suitable for a wide range of pipe sizes and materials

– Suitable for lined pipes

– Dual channel/dual path versions available

– Velocity, volume and totalized flow

– Built-in keypad for field programming
June 9, 2025 BY
IN ABB

ABB REJ603 Self-Powered Feeder Protector

The REJ603 relay is used for selective short-circuit and earth-fault protection of feeders in secondary distribution networks, as well as for transformer protection in utilities and industry.

The relay is a self-powered digital relay that does not require an external auxiliary supply voltage, making it ideal even for installations in remote areas where auxiliary power is not available.

The relay operates from a current transformer.

The REJ603 is mainly used in Ring Main Units (RMUs) in distribution networks.

The relay provides earth current measurement by internal calculation, or it can measure earth current from an external core balanced current transformer (CBCT).

The main features of the relay are

Self-powered three-phase non-directional overcurrent and earth fault protection with DMT and IDMT characteristics

Dual earth fault measurement modes – internal vector summing or external CBCT inputs

Integration of IDMT curves (IEC and special) in a single product to meet the time-coordinated requirements of secondary distribution protection

Protection blocking via second harmonic measurement to ensure stability during transformer magnetic surges

Capacitive discharge pulse output for low-energy trip coils

Built-in manual reset electromechanical sign for trip indication

Easy setup via DIP switches, protected by transparent cover

Compact design and mounting for ring main unit (RMU) applications

Test equipment for testing the entire program, including primary CTs, relays and trip coils
June 9, 2025 BY
IN ABB

ABB REV615 Capacitor bank protection and control relay

The REV615 is a member of the ABB Relion product family and is part of its 615 Protection and Control Series of relays.

Scope

Protection of capacitor banks and harmonic filter circuits

Product advantages

Off-the-shelf standard configuration for quick and easy setup with customized features

Pull-out plug-in design for quick installation and testing

Large graphic display for customizable SLDs, accessible locally or via an easy-to-use web browser-based HMI

Extensive lifecycle services

Product Features

Capacitor bank overload and unbalance protection, non-directional overcurrent and directional ground fault protection, voltage and frequency based protection and measurement functions

Current-based unbalance protection, compensation for natural unbalance, and current-based capacitor bank switching resonance protection

Optional arc protection and high-speed output

Supports IEC 61850 version 1 and 2. including HSR and PRP, GOOSE messaging, and IEC 61850-9-2 LE to minimize wiring and supervised communications

IEEE 1588 V2 for high-precision time synchronization and maximum benefits of Ethernet communications at the substation level

Supports Modbus, DNP3 and IEC 60870-5-103 communication protocols
June 9, 2025 BY
IN ABB

ABB REB611 Busbar Protection Relay

DESCRIPTION

The REB611 is a specialized busbar protective relay for split-phase short-circuit protection, control and monitoring of single busbars.

The REB611 is suitable for high impedance based applications in utility substations and industrial power systems.

In addition, the relay can be used in restricted earth fault and residual earth fault applications to protect generators, motors, transformers and reactors.

The 611 series relays fully support the IEC 61850 standard for communication and interoperability of substation automation equipment.

This includes fast GOOSE (Generic Object Oriented Substation Event) messaging, and can now also benefit from the extended interoperability offered by version 2 of the standard.

The relays further support the Parallel Redundancy Protocol (PRP) and the High Availability Seamless Redundancy Protocol (HSR).

The 611 series relays can use both IEC 61850 and Modbus® communication protocols.

The REB611 is a member of the ABB Relion® product family and part of the 611 protection and control product family.

The 611 series relays are characterized by a compact and withdrawable unit design.

The 611 series offers simplified yet powerful functionality for most applications. After entering the application-specific parameter set, the installed relay is ready for operation.

The IEC 61850 standard further increases communication capabilities and interoperability between substation automation equipment, adding flexibility and value for end users and electrical system manufacturers.

The REB611 is a specialized busbar protective relay designed for split-phase short-circuit protection, control and monitoring of single busbars.

The REB611 is used for high impedance based applications in utility substations and industrial power systems.
June 9, 2025 BY
IN ABB

ABB REX610 Protection and control functions

Digital relays are based on the use of microprocessors. The first digital relay was released in 1985.

One of the major differences between traditional electromechanical relays and static relays is the way the relays are wired.

Electromechanical and static relays have fixed wiring and are set to manual.

Digital relays, on the other hand, are programmable relays whose characteristics and behavior can be programmed. Most digital relays are also multifunctional.

Scope

Modern Protection Relays

Multi-function protection

Product Advantages

Provide continuity of power to consumers

Protecting network assets

Prevent life-threatening electrical accidents

Product Features

Self-checking facility

Low load relays for improved accuracy

Fast fiber optic communication with substation LAN

Adaptive relay program

Allows storage of historical data
June 9, 2025 BY
IN ABB

ABB REX 521 Feeder Protection Relay

Provides basic protection for busbars and feeders in utility substations and industrial distribution systems

Products not used since 2012

The feeder protection relay REX 521 is designed for protection, control, measurement and monitoring in medium-voltage grids, as well as for the protection of medium and large three-phase AC motors in circuit breaker-controlled motor drives.

and for the protection of medium and large three-phase AC motors in circuit breaker controlled motor drives.

Typical applications include inlet and outlet feeders and motor feeders as well as substation protection.

In addition, the relays can be used as backup protection for power transformers and as backup protection for high-voltage line protection relays.

The protective relay is equipped with energizing inputs for conventional current and voltage transformers. Hardware versions with current and voltage sensor inputs are also available.

The REX 521 feeder protection relay is further enriched with additional functions to provide your grid with more efficient protection, extended measurement functions, monitoring, control functions and connectivity.

The REX 521 is primarily used in single-bus solutions for various protections using a single circuit breaker.

With pre-fabricated standard configurations, the unit can be used in different types of networks. Typical applications include input and output feeders in radially isolated neutral, resonant grounded, solid grounded and resistance grounded systems.

Scope

Protection, control, measurement and monitoring in medium voltage networks and for the protection of medium and large three-phase AC motors
June 9, 2025 BY
IN DEIF

DEIF AGC-4 Mk II Generator Set Automatic Controller

The AGC-4 Mk II supports many popular engine protocols, with more added with each software update.

The controller meets Tier 4 Final/Stage V emissions requirements.

AGC-4 MK II

Supports Global Grid Norms

The controller complies with virtually all grid code regulations used around the world, including (but not limited to) IEEE 1547. VDE 4110/4105. EN50549-1/2 and ENA G99.

Protection and grid support features are included, giving you a “one controller fits all” solution.

Hybrid Applications

The AGC-4 Mk II is plug-and-play with DEIF’s ASC-4 Hybrid Controller, making it easy to integrate diesel genset applications into a wide range of hybrid power units.

The market-leading solution maximizes sustainable power penetration while always ensuring sufficient spinning reserves when photovoltaic (PV) production declines.

Intuitive external touch screen

You can choose from a number of different display and control options for the AGC-4 Mk II, ranging from an LCD display and buttons to a range of touchscreens, providing you with greatly improved overview and control options.
June 9, 2025 BY
IN DEIF

DEIF GPU-3 graphics card Generator protection unit

Easy to operate and configure, DEIF’s Generator Protection Unit (GPU-3) is the ideal controller for PLC-based power management systems.

Generator Protection Unit

Controller for PLC-based power management systems

DEIF’s Generator Protection Unit (GPU-3) is easy to operate and configure and is the ideal controller for PLC-based power management systems.

The GPU-3 provides comprehensive generator protection and synchronization functions. Easily connected to PLCs, SCADA systems, etc. via serial communication.

The unit has all the necessary three-phase measurement circuits and displays all values and alarms on a high quality LCD screen.

The optional Engine Interface Card also features a separate power supply and a separate microprocessor that turns the GPU-3 into an engine control unit with start/stop and protection functions.

and a separate microprocessor. In the event of a GPU3 processor failure, the Engine Interface Card will go into backup mode, ensuring uninterrupted engine monitoring.

monitoring. In the event of a shutdown alarm, the engine automatically shuts down, making it a reliable solution for controlling and monitoring the genset.

Customize the application to your needs by downloading and upgrading the software for free at www.deif. com:

Dedicate specific functions or logic conditions to different inputs and outputs and adapt all sequences to your requirements.

Features of the GPU-3

► Generator/Bus Protection

► Synchronization

Multiple display units and operator panels can be set up

► Engine protection for backup channels in case of shutdowns

► Motor control and communication

Menu

Search for products

Back to Top
Product has been added to your cart